Waterway Executive 56 Frame Spa Pump, 4HP, 230V

<< Previous in Waterway Executive 56

Next in Waterway Executive 56 >>

: ON SALE FOR A LIMITED TIME $289.00

Part Number: 3721621-1D

Manufacturer: Waterway Plastics

Manufacturer Part No: 3721621-1D

Pump Union Fittings (see bottom of this page)

Buttress Adapter

Quantity:

Email this page to a friend

Waterway Executive 56 Spa Pump, 4HP, 230V

Waterway Plastics 56 Frame Executive spa pump wet end

assembled to a 56 frame, 4hp, 2-speed 230V hot tub motor

This spa pump has a 2 inch intake and a 2 inch discharge for plumbing

(but measures 3 inches - see bottom of this page) Use Part No. 415-6010 Buttress Adapter to convert to a 2-1/2 inch intake
Manufacturer Part No. 3721621-1D Other Part No. PF-40-2N22C

Features:

Executive spa pump wet end designed specifically for 56-frame spa motors
Two double shielded ball bearings with moisture resistant grease for quieter operation and longer life
Two speed spa motors have four sets of insulated windings for increased efficiency
56 frame spa motor for added strength, cooler operating temperature and longer motor life
Large 6-1/2" diameter wet end for higher head pressure
Split capacitor, (start and run) for less energy consumption
Thermally protected to extend life expectancy of the spa motor
Highly versatile spa wet end can be rotated every 90 degrees
Viton seals
Three year manufacture's warranty on spa motor and spa pump wet end

How to measure for the 4hp 56 frame Executive spa pump wet end:

Pump Union Fittings for Executive 2" and 2-1/2 Plumbing Use Buttress Adapter for 2-1/2 intake

Manufacturer Part No. 3721621-1D Other Part No. PF-40-2N22C

Related Products

Waterway Pump Union 400-5670
: $8.00
Man. Part No. 400-5670 2 inch pump union for Hi-flo and 2 inch Executive

Waterway Pump Union 400-6010
: $9.00
Man. Part No. 400-6010 2-1/2 inch pump union for Executive Spa Pumps

Waterway Threaded Buttress Union Adapter, 2" X 2.5"
: $6.50
Waterway Plastics threaded buttress union adapter. Manufacturer's Part No. 415-6010 Use to make a 2 inch pump wet end 2.5 inches (measures 3" ID and 3-3/8" OD)