|
|
SPA PUMPS
All of our pumps and motors are brand new. Not Rebuilt!
Our spa pumps are available in 115V and 230V combinations depending on the horsepower. Choose from the different Waterway pump wetends below. Fitting sizes range from 1-1/2", 2" and 2-1/2" depending on the wetend you choose. We use single speed and dual-speed motors on all of our spa pumps below. Quality is important, that's why we choose only the best products for our store. Check out our Low Prices! If you need assistance call 1-727-939-8044
Click on the pictures below to view or buy pumps |
Waterway Plastics center discharge pump wetend assembled to a 48 frame 1 or 2-speed motor. Choose your Horsepower/Voltage below. This wet end uses only 1-1/2 inch plumbing. If you need union fittings choose as an option below.
|
Waterway Plastics side discharge pump wetend assembled to a 48 frame 1 or 2-speed motor. Choose your Horsepower/Voltage below. This wet end uses only 1-1/2 inch plumbing. If you need union fittings choose as an option below.
|
Waterway Plastics hi-flo pump wetend assembled to a 48 frame, 1 or 2-speed motor. Choose your Horsepower/Voltage below. This wet end can use either 1-1/2 inch or 2 inch plumbing. If you need union fittings, choose as an option below.
|
Waterway Plastics Executive pump wetend assembled to a 56 frame, 2-speed motor. Choose your Horsepower/Voltage below.This pump can use two, 2 inch unions, one for the intake and one for the discharge, or one 2-1/2 inch union for the intake with one, 2
|
Waterway's Tiny Might circulation pump. Available in 110V or 220V. Choose voltage below when ordering. Also, union fittings available in 1" socket or 1" barbed (scroll down page to view pictures).
|
Waterway's 48 frame, single-speed circulating pump.
|
Waterway's bath wet end assembled to an 48 frame, 1.5hp single speed motor. 1-1/2" intake and discharge. 1-1/2" pump unions available as an option below.
| |
|
|